Nº do modelo: 5052 Aplicação: Decorações, Dissipador de calor, Ferramentas de transporte, Porta e janela, Parede de vidro, Grau do navio: Série 5000 Técnica: Laminado a quente Têmpera: O - H112 Superfície: Acabamento do moinho Especificação: Padrão da China Código HS: 7606129000 Tipo: Folhas de alumínio Forma: Superfície plana Tratamento: Acabamento de moinho Liga: Liga Certificação: ASTM, JIS, GB / T, EN, ASTMB Marca registrada: HM Origem: China 5052 Folha de alumínio usada para placa de embarcação \ n \ nPlaca de alumínio super larga \ nLiga: 1050 , 1060, 1100, 3003, 5052 5083 6061 5005 6082 etc. \ nTemper: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc. \ nEspessura: 0,2 mm - 400 mm \ nLargura: Abaixo de 2.800 mm \ nComprimento: Abaixo de 10.000 mm \ nEmbalagem: Padrão de exportação, coberto com papel pardo e filme plástico, em seguida, embalado com banda de aço e caixa / palete de madeira \ nOrigem: China \ nCabeça Tempo: Dentro de 25 dias \ nProdutividade: 4000MT / Mês \ nPagamento: T / T, L / C irrevogável à vista \ n Observações: Requisitos específicos de liga, têmpera ou especificação podem ser discutidos conforme sua solicitação.
| Aluminium Plate / Slab 5052 |
| Typical Chemistry (% Maximum unless shown as a range) |
\ n \ n \ n
| Cu | Si + Fe | Mn | Mg | Zn | Cr | Al |
| 0.10 | 0.45 | 0.10 | 2.2 / 2.8 | 0.10 | 0.15 / 0.35 | Balance |
\ n \ n \ n
| Characteristics |
| 5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. |
| Typical Applications |
| 5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing. |
| Mechanical Properties |
\ n \ n \ n
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2"
(50mm) |
|
| 5052-0 | 28.0 | 196 | 13.0 | 91 | 25 | 47 |
| 5052-H32 | 33.0 | 231 | 28.0 | 196 | 12 | 60 |
| 5052-H34 | 38.0 | 266 | 31.0 | 217 | 10 | 68 |
\ n \ n \ n \ n
| Aluminium Plate / Slab 5083 |
| Typical Chemistry (% Maximum unless shown as a range) |
\ n \ n \ n
| Cu | Si | Fe | Mn | Mg | Zn | Cr | Ti | Al |
| 0.10 | 0.40 | 0.40 | 0.3 / 1.0 | 4.0 / 4.9 | 0.25 | 0.05 / 0.25 | 0.15 | Balance |
\ n \ n \ n
| Characteristics |
| 5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion. |
| Typical Applications |
| 5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels. |
| Mechanical Properties |
\ n \ n \ n
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2"
(50mm) |
|
| 5083-0 | 42 | 294 | 21 | 147 | 22 | - |
| 5083-H321 | 46 | 322 | 33 | 231 | 16 | - |
\ n \ n \ n \ n
| Aluminium Plate / Slab 6061 |
| Typical Chemistry (% Maximum unless shown as a range) |
\ n \ n \ n
| Cu | Si | Fe | Mn | Mg | Zn | Cr | Ti | Al |
| 0.15 / 0.40 | 0.4 / 0.8 | 0.70 | 0.15 | 0.80 / 1.2 | 0.25 | 0.04 / 0.35 | 0.15 | Balance |
\ n \ n \ n
| Characteristics |
| 6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration. |
| Typical Applications |
| 6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers. |
| Mechanical Properties |
\ n \ n \ n
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2"
(50mm) |
|
| 6061-0 | 18.0 | 126 | 8.0 | 56 | 25 | 30 |
| 6061-T4 | 34.0 | 238 | 22.0 | 154 | 21 | 65 |
| 6061-T6 (T651) | 44.0 | 308 | 41.0 | 287 | 17 | 95 |
Grupo de Produto : Chapa e Chapa de Alumínio
